Cookie Img

CNC Inverter Plasma Cutting Machine

CNC Inverter Plasma Cutting Machine
CNC Inverter Plasma Cutting Machine
Product Code : PC - 100
Price And Quantity
Minimum Order Quantity :
Unit of Measure :
Product Description

Inverter Plasma Cutting Machine IPC-100

For over twenty years we have been serving our most discerning clients spread across industry verticals with a comprehensive range of  Inverter Plasma Cutting Machine ( No: IPC-100) incorporating most advanced features. This range is appreciated for energy saving features and durability. Clients can avail our machines in both standard and customized options. In the customized range we incorporate details provided by clients. These machines operate under the current range of 30amps DC to 100amps DC.

Salient Features :

  • Inverter based air plasma metal cutting machines with single half- bridge ESD protector IGBT module.
  • Single IGBT driver with isolation transformer, under voltage protection, dynamic short circuit protection IEC60068-1 climate 40/085/56, non-corrosive climate class 3k3 acc En60721, VCEsat protection with failure management. Unique feature to prevent IGBT failure.
  • Under voltage/ over voltage / single phasing protection with indication.
  • High input supply voltage range.
  • High temperature protection with indication.
  • Low air pressure cut off mechanism with indication.
  • MCB on back panel for over current and short circuit safety.
  • Superior Cutting quality with high filtration.
  • High quality and sensitive negative feedback system for arc stability.
  • High open circuit voltage for good arc striking.
  • No load power consumption is very low (less than 0.1 KVA)
  • Efficiency of power source is more than 92%
  • Electronic high frequency circuit no spark gap.
  • Step-less current control facility.
  • Actual cutting current is displayed on front panel digital meter.
  • 100 % duty cycle at full cutting current for hand cutting operation.
  • H-class insulated transformer winding.
  • All PCB's are coated with strong insulation to protect than against humidity, moisture and metallic dust.
  • Compact and light weight design and good layout for easy servicing.
  • The machine supports the cutting torch cable of 20 mtrs. Without compromising on cut quality jand capacity in all types of cutting mode.
  • The torch is capable of doing underwater cutting as well as cutting under the spray of water jet.
  • Power source has unique feature for cutting with pilot arc cutting and touch cutting mode.
  • Pilot arc ensures main arc striking on rusty and coated surfaces.
  • Pilot arc current is controlled with electronic circuit and not with pilot arc resistor which gives soft start and better consumable life.
  • The power source is of Indian origin.
Technical Specifications are as below: 



Input supply

415 V AC, 3 Phase, 50Hz.

Operating supply voltage range

370 V AC to 460 V AC

Input power

16 KVA at 100 Amps.

14 KVA at 80 Amps.

Open circuit voltage

320 V DC to 350 V DC.

Cutting current Range

30 Amps. DC to 100 Amps. DC

Cutting current control

Stepless with fine control.

Duty cycle @40 deg. Cel. Amb

100 % at 80 Amps., 80 % at 100 Amps.

Pilot Arc

Electronic pilot arc.

Class of Insulation

H class.


Forced air cool.



Cutting capacity SS clean cut Max. Rough cut

35 mm., 40 mm.


75 Kg.

External Dimensions (L. W. H.)

785mm. 360mm. 840mm.

Gas supply

Clean, dry, oil free air

Flow pressure

70 PSI (4.8 bar) @ 11CFM

Contact Us

Unit No. 104, 1st Floor, Acme Industrial Park, W.E. Highway, Off. I.B. Patel Road, Goregaon (E), Mumbai, Maharashtra, 400063, India
Phone :91-22-40203456/26865065/26862843/26862893